Warehouse and Industrial Painting for Working Facilities
High-bay interiors, structural steel, dock areas, and metal building exteriors coated around production and shipping schedules.
Licensed NV C-4 #0092296 · UT #14220959-5501 · Serving Nevada & Utah
What Kind of Facility Are We Coating?
Every industrial facility wears differently. Pick your facility type to see the problems we actually solve and how we run the work around your operation.
High-bay walls and dock areas coated without stopping the floor.
- Racking and forklift traffic in the way of every wall
- Faded safety striping and scuffed dock areas
- No window where the whole building can shut down
- Lift work on high-bay walls, aisle by aisle
- Safety striping and floor marking re-laid where needed
- Phased schedule around shipping and receiving hours
Height, access, and uptime decide the job
A warehouse repaint is rarely complicated as a painting problem. It is complicated as an access and scheduling problem: racking in the way, forklift traffic that cannot stop, thirty-foot walls, and a shipping schedule that does not care about your dry times.
It is also a substrate problem. Tilt-up concrete, metal panel, and structural steel each want a different primer and a different coating system, and getting that wrong shows up as rust bleed and peeling within a season.
What we coat in a facility
Most facility scopes cover more than walls. We quote each element separately so you can decide what gets done now and what waits for the next budget cycle.
- High-bay interior walls and ceilings, sprayed for coverage and speed
- Structural steel, columns, joists, and mezzanines
- Dock doors, bollards, guard rails, and equipment enclosures
- Tilt-up concrete and metal panel exteriors
- Safety striping, aisle marking, and color-coded zones
- Office and break areas inside the facility footprint
Coating Systems, Matched to What They Protect
| Coating system | What it's built for | Industries that need it |
|---|---|---|
| Epoxy floor coatings | Chemical and abrasion resistance on concrete | Warehousing, manufacturing, auto/fleet service bays |
| Direct-to-metal / anti-corrosion coatings | Rust prevention on exposed steel | Structural steel, dock doors, equipment |
| Industrial urethane topcoats | UV stability layered over epoxy | Any exterior-facing coated surface in direct Las Vegas sun |
| Elastomeric coatings | Flexible, crack-bridging protection | Metal panel and tilt-up concrete exteriors |
| Low-VOC / low-odor systems | Safe application in occupied or food-adjacent spaces | Food & beverage distribution, any facility that can't fully evacuate |
| Safety striping & floor marking | Visual hazard and traffic-lane marking | Warehousing, manufacturing, any forklift-traffic facility |
Working around production
We phase by bay, aisle, or elevation, and work nights, weekends, or shutdown windows when the operation cannot pause. Overspray control, containment, and equipment protection are planned before the first sprayer comes out.
Where racking cannot be cleared, we work the accessible faces and schedule the remainder around your inventory cycles instead of asking you to empty the building.
Substrate and coating selection
Bare or rusted steel gets cleaned and primed with the right primer before finish coats. Metal panel exteriors in the Nevada and Utah sun get systems chosen for UV, not just color. The spec goes on the estimate so you know exactly what is being applied.
The coating systems table above maps each system to what it protects and the facilities that actually need it.
- Direct-to-metal
- Epoxy
- Industrial urethane
What the project actually looks like
Facility walk and access review
We map bays, heights, racking, traffic lanes, and the windows where work can safely happen.
Line-item proposal by area
Walls, steel, doors, exteriors, and striping quoted separately with named products and coat counts.
Containment and protection
Equipment, inventory, conveyors, and sprinkler heads masked or covered before any spraying starts.
Coat, stripe, and hand back
Work executed by phase, then walked with your facilities contact with any touch-ups closed out.
What moves the price
We do not publish a price list, because a real number depends on your property. These are the things that actually change it, and every one of them shows up as a line item on your estimate.
- Wall height and access
Boom lifts and scissor lifts add cost and slow every square foot above standard reach.
- Substrate and existing condition
Rust, chalking, and failing prior coatings require cleaning and priming before finish coats.
- Racking and obstructions
Whether racking can be cleared or worked around drives both schedule and labor.
- Operating schedule
Shutdown windows, night shifts, and weekend work price differently than open access.
- Containment requirements
Protecting inventory, conveyors, and sensitive equipment from overspray takes real setup time.
- Coating system
Direct-to-metal, epoxy, and industrial urethane systems cost more than standard wall coatings.
For a full breakdown of commercial and industrial painting costs in the Las Vegas Valley by property type, see our commercial painting cost guide.
Every project includes a written 2-year workmanship warranty.
What Is Included, and What Is Not
You approve the scope in writing before work starts. If an item is not listed on the estimate, it is not included in the price.
Included
- Written scope by area with named products and coat counts
- Containment and protection of equipment and inventory
- Surface cleaning, rust treatment, and priming as specified
- Lift and access equipment as required by the scope
- Phase schedule agreed with facilities before start
- Certificates of insurance and safety documentation
- Written workmanship warranty
Not included unless quoted
- Structural steel repair, welding, and fabrication
- Roof coatings and roofing repair
- Floor coatings and epoxy flooring unless quoted separately
- Racking teardown, relocation, or reinstallation
Where We Work in the Las Vegas Valley
Most of our warehouse and industrial work is in North Las Vegas's logistics and manufacturing corridor, with facilities across Henderson, Summerlin, and Spring Valley as well. We also serve industrial and commercial properties across southern Utah, from St. George to the Wasatch Front.
Las Vegas Valley
From North Las Vegas and Henderson to Summerlin, Spring Valley, Paradise, and Green Valley.
- Las Vegas
- Henderson
- North Las Vegas
- Summerlin
- Paradise
- Spring Valley
- Sunrise Manor
- Winchester
- Boulder City
- Mesquite
- Green Valley
- Crossroads
- College Park
- Vista
- Winterwood
- Meadow Mesa
- Emerald
- Garside
- Calico Ridge
- King
- Silverado
- Red Rock Vista
- Westridge
- Huntridge
- Topaz
- Paradise Valley
- Black Springs
- Red Rock
- East Las Vegas
- Seven Hills
Southern Utah
Industrial and commercial properties from St. George to the Wasatch Front.
Not seeing your area? See our full Nevada service area, Utah service area, or get a free estimate.
Straight answers before you call
Get a Warehouse or Industrial Painting Estimate
We walk the facility, map access, and quote each area separately so nothing is buried in one number.
Written warranty on every project.